Vandal Resistant Grills / Baffles & Back Boxes
Your Commercial and Fire Safety Device Manufacturer
Search
Contact Us
Site Map
Return to Product Index
Home
Company Info
Our Products
 Product Picture
 Part No.
 Description
Return to Grills & Back-boxes Index

Round Grills & Enclosures for 8" Speakers

For Vandal Resistant Required Locations     

Specification Sheet Here

Dimensions

 

G24W

 

  • 12-3/4" Round Vandal Resistant baffle for an 8" Speaker.
  • Use with E10 enclosure for recessed (flush) mounting.
  • Complete with tamper-resistant hardware and a stainless steel woven mesh that goes between the grille and the speaker.
  • Heavy gauge die stamped steel, powder coated finish.
  • Driver bit set is available optionally, specify part number H-BIT-100.
E10
  • 4" deep, for recessed / flush mounting.
  • Flange is formed out. Not recommended for concrete.
  • Acoustically dampened.
  • Mounting clips included

Specification Sheet Here

dwg File

E10 Dimensioned
G11W
  • 12-3/4" Round, NOT - Vandal Resistant baffle for an 8" Speaker.
  • This baffle is part of the vandal resistant family for install purposes. If you wish to keep back boxes standard on the site, it is possible with this baffle.
  • Use with E10 enclosure for recessed (flush) mounting.
  • Complete with standard hardware.
  • Standard Gauge Die Stamped CRS, powder coated white finish.

Specification Sheet Here

dwg File

Square Grills & Enclosures for 8" Speakers

For Vandal Resistant Required Locations     

Specification Sheet Here

Dimensions

 

G23W

 

  • 11-1/2" square vandal resistant baffle for an 8" Speaker.
  • Use with either E23 enclosure for recessed(flush)mounting, or the SE23 enclosure for surface mounting.
  • Complete with tamper-resistant hardware and a stainless steel mesh that goes between the grille and the speaker.
  • Fully welded corners, heavy gauge steel, powder coated finish
  • Driver bit set is available optionally, specify part number H-BIT-100
 
E23
  • 10-5/8" square, 3-3/4" deep, for recessed mounting of the speaker.
  • Flange is formed in
  • Can be installed into poured in place concrete walls.
  • Acoustically dampened.
  • Mounting clips included
 
SE23  
  • 11-1/2" square, 4" deep for surface mount conditions
  • Back is closed type.
  • Made from very heavy gauge cold rolled steel and painted an off white to match the baffle above.
  • Pressed in baffle mounting nuts make for a solid assembly

 

 
Click to enlarge
G49W
  • 11-1/2" square NOT - vandal resistant baffle for an 8" Speaker.
  • This baffle is part of the vandal resistant family for install purposes. If you wish to keep back boxes standard on the site, it is possible with this baffle.
  • Use with either E23 enclosure for recessed(flush)mounting, or the SE23 enclosure for surface mounting.
  • Complete with standard hardware.
  • Standard Gauge CRS, powder coated white finish.
 
Back to Product Index

Last Update: Tuesday, 16-May-2017 | Top of Page

Return to Product Index
Home
Company Info
Our Products
Our Sales Staff can be reached at . This document is maintained by
Material Copyright 1999-2017 Arnscott Electronics Inc.