Fire-Safety Devices
Your Commercial and Fire Safety Device Manufacturer
Search
Contact Us
Site Map
Return to Product Index
Home
Company Info
Our Products
 Product Picture
 Part Number
 Description
Compatible Baffle

Box Dimensions

Click to enlarge

Cu Ft
4" Voice Alarm Speaker Devices         

AS4000 Series

 

AS4071

AS4093

AS4115

 

  • 4" Speaker Fire Device
  • Available in 70.7 Volt
  • 2 Watt Maximum power
  • 1/4, 1/2, 1 & 2 Watt Taps
  • Available in round or square versions
  • Surface or Recessed mounts available
  • ULC Listed and approved
  • Red or any other colour grills are available as a special order, minimums may apply.
  • For enclosure information, reference the specification sheet below

AS4000 Series

     

 

E15

E15-4

  • Most commonly used enclosure for 5" speaker assemblies
  • 3-1/2" deep, 6" round (E15-4 is 4" deep)
  • ULC listed as part of a speaker device
  • Made from satin coat 20 gauge CRS.
  • Mounting Straps welded at 180 degrees for easier mounting into difficult conditions
  • 4 combination knockouts for conduit
  • ground screw installed

E15 Series

  1. G15W
  2. G71W
E15 Dimensions

0.05

0.06

E40
  • Most commonly used enclosure for 5" speaker assemblies where a square grill is required
  • 4-5/8" deep, 5-1/2" square
  • ULC listed as part of a speaker device
  • Ground Screw Included
  • Made from satin coat 20 gauge CRS.
  • Mounting Slots are provided to be used in conjunction with AEG MC1-P mounting rails.
  • 2 combination knockouts for conduit
  • Inside sprayed with water based anti resonance material

E40 Series

  1. G70W
E40 Dimensions 0.08
SE45W
  • Designed for surface mount conditions, such as a concrete wall.
  • 3-1/2" deep, closed back construction
  • Made of 20 Gauge steel, powder coated speaker white
  • 2 adjustable mounting clips for the easy installation of the baffle are included
  • ULC recognized as part of a fire device
  • Design of enclosure reduces mechanical resonance, no dampening required.
  • Ground screw provided

SE45 Series

  1. G72W
SE45W Dimensions 0.06

SE40SB

  • Designed for surface mount conditions, such as a concrete wall.
  • ULC recognized as part of a fire device
  • Design of enclosure reduces mechanical resonance, no dampening required
  • Ground Screw included

E40 Series

  1. G70W
SE40SB Dimensions 0.1
Clean Room Fire Speakers          

G75SS

G75SS

  • Clean room speaker cover
  • ULC Approved and listed
  • Fits our AS4093
  • Stainless steel with white Mylar diaphragm
  • Stainless steel hardware included
  • For more Clean room Products

G7XX Series

A40CR Series

G7XX Repair

     
8" Voice Alarm Speaker Devices

AS8600 Series

Standard Speakers

ASAL81G11W

ASAL81G11-14W

ASAL82G25W

  • 8" Speaker Fire Device
  • Available in 70.7 & 25 Volt (25 volt are not ULC Listed)
  • 4 Watt Maximum power
  • 1/4, 1/2, 1,2 & 4 Watt Taps
  • Available in round or square versions
  • Surface or Recessed mounts available
  • Strobe options are soon available
  • ULC Listed and approved
  • For enclosure information, reference the specification sheet below
  • Vandal-Resistant models
  • For more Clean room Products

AS8600 Series

     

 

E10

  • Most commonly used enclosure for 8" speaker assemblies
  • 4" deep
  • Inside sprayed with water based anti resonance material
  • ULC listed as part of a speaker device
  • Made from satin coat 20 gauge CRS.
  • Mounting Straps welded at 90 degrees for easier mounting into difficult conditions
  • 4 combination knockouts for conduit

E10 Series

  1. G10W
  2. G11W
  3. G11A
  4. G11AW
  5. G11SS
  6. G24W
E10 Dimensions

0.18

E20

  • Most commonly used enclosure for 8" speaker assemblies where a square grill is required
  • 4" deep, for recessed installations
  • Inside sprayed with water based anti resonance material
  • ULC listed as part of a speaker device
  • Made from satin coat 20 gauge CRS.
  • Mounting Slots are provided to ensure quick installation using our MC1 mounting channels
  • 4 combination knockouts for conduit

E20 Series

  1. G25W
E20 Dimensions

0.31

SE20SB

 

  • Surface mount for 8" speakers
  • 4" deep, not lined or dampened
  • CLOSED back construction
  • ULC recognized as part of a fire device
  • White Powder Coated Finish
  • Design of enclosure reduces mechanical resonance, no dampening required.

E20 Series

  1. G25W
SE20SB Dimensions

0.37

SE23

 

  • Surface mount for 8" Vandal-Resistant Speakers
  • Heavy Duty CRS powder coated metal for durability
  • 4" deep, not lined or dampened
  • CLOSED back construction
  • ULC recognized as part of a fire device
  • Design of enclosure reduces mechanical resonance, no dampening required.

E23 Series

  1. G23W
  2. G49W
SE23W Dimensions

0.30

E11
  • Most commonly used enclosure for 8" speaker assemblies where the enclosure is to be embedded into concrete
  • 3-1/4" deep
  • Made from satincoat 20 gauge CRS.
  • Mounting Straps welded at 90 degrees for easier mounting into difficult conditions
  • 4 combination knockouts for conduit

E11 Series

  1. G11W-14
E11 Dimensions 0.14
MC1-P  
  • Mounting Channels, sold as pairs, 1 pair required per back box
  • 23-3/4" long, U-Channel construction, pre punched holes for locators to the back box.

MC1

  1. See Ref sheet
MC1 Dimensions  
MF1  
  • Mounting Frame, sold as each, one required per back box
  • 23-3/4" long, U-Channel construction, pre punched holes for locators to the back box.
  • Can be used with some torsion mounted grills
  • See cross reference sheet for compatibility

MF1

  1. See Ref Sheet
MF1 Dimensions  
Installation Tools  
  T-10HC-HD 
  • Hole Saw that will cut up to 260 mm (10-1/4") hole in wood, drywall or ceiling tile.
  • Adjustable from 32 - 260 mm (1-1/4" to 10-1/4")
  • Cuts sheet acrylic up to 1" thick
  • Cuts aluminum, brass and sheet metal up to 1/16" thick
  • Heavy duty dust shield keeps the tool steady and perpendicular to the work surface
  • Compression spring absorbs vibrations while cutting
  • Cutting diameter is infinitely variable between the range listed above
  • A set of balanced counter weights is included to minimize gyration during use.
  • Cut holes for anything from pot lights to speaker enclosures and lots of other uses.
 
     
T-10HC
  • Hole Saw for drywall or ceiling tile, max 10-3/8" Diameter
  • Includes 2 dust shields
  • Fits 10mm(3/8") corded or battery operated drills
  • Cuts holes in seconds, contains most of the dust
  • Carbide coated cutters
  • Fully adjustable, 159-263mm(6-1/4" to 10-3/8") in 10mm (3/8")increments
  • Economically priced

Operating Instructions

     
Visible Strobe Devices        
 

Strobes

Speaker/Strobes

  • Quad intensity strobes and speaker/strobes are soon available. Contact AEG for more information.
     

Back to Product Index

Last Update: Tuesday, 16-May-2017 | Top of Page

Return to Product Index
Home
Company Info
Our Products
Our Sales Staff can be reached at . This document is maintained by
Material Copyright 1999-2017 Arnscott Electronics Inc.